🔌 USB Installation Guide

Run the stealth dashboard directly from your USB drive.
Portable. No HDD installation. Easy on/off.

⏱️
5 min
Setup Time
💾
13 MB
USB Space
🔧
Super Easy
Difficulty
⚡
Portable
No Install

📋 Requirements

What You Need

  • ✅ RGH or JTAG modded Xbox 360
  • ✅ USB drive (at least 128 MB, FAT32 format)
  • ✅ Aurora or FSD dashboard (to launch from)
  • ✅ Internet connection on Xbox 360
  • ✅ Valid keyvault (non-banned)
  • ✅ USB_Files.zip downloaded
✓ No HDD Installation! Everything runs from USB. Your HDD stays untouched (except SSL certs which are needed).

🚀 Setup Steps

Step 1: Download & Extract

Download the USB Files package and extract it.

Download USB_Files.zip

Extract to get:

USB_Files/ └── StealthClient/ ├── default.xex ├── stealth.cfg ├── certificates.bin ├── assets/ ├── logs/ └── USB_INSTRUCTIONS.txt

Step 2: Format USB Drive (if needed)

Make sure your USB drive is formatted as FAT32.

Windows:

  1. Right-click USB drive
  2. Select "Format"
  3. Choose "FAT32"
  4. Click "Start"
⚠️ Warning: Formatting erases all data on the USB drive! Backup important files first.

Step 3: Copy to USB Drive

Copy the entire StealthClient folder to your USB drive root.

Copy this:

USB_Files/StealthClient/

To USB root:

E:\StealthClient\ (or whatever your USB drive letter is)
✓ Result: Your USB should have: E:\StealthClient\default.xex, stealth.cfg, etc.

Step 4: Safely Eject USB

Safely eject the USB drive from your PC.

  • Windows: Right-click USB → "Eject"
  • Wait for "Safe to remove" message
  • Unplug USB from PC

Step 5: Plug USB into Xbox 360

Connect the USB drive to your Xbox 360.

Plug into either USB port on the Xbox 360 (front or back).

💡 Tip: Make sure Xbox 360 is already running Aurora or FSD dashboard.

Step 6: Launch from Aurora/FSD

Navigate to the dashboard on your USB drive and launch it.

From Aurora:

  1. Go to Apps section
  2. Find USB Storage
  3. Navigate to: Usb0:\StealthClient\
  4. Launch default.xex

From FSD:

  1. Go to File Manager
  2. Select USB Device
  3. Navigate to: StealthClient\
  4. Launch default.xex

Step 7: First Launch - Auto-Configuration

Dashboard automatically configures itself on first launch.

What Happens:

  1. Dashboard loads from USB (10 seconds)
  2. ✓ Detects USB path automatically
  3. ✓ Installs SSL certificates to system
  4. ✓ Configures DNS settings
  5. Main menu appears
  6. Ready to use!

Total time: ~30 seconds

Configuration: AUTOMATIC!

Step 8: Connect to Xbox Live

You're ready to go online!

  1. Select "Connect to Xbox Live"
  2. Dashboard connects to stealth server
  3. Verifies keyvault
  4. ✅ Connected!
🎉 Setup Complete!
Dashboard is running from USB! You're protected and ready to play!

🎮 Daily Usage

Every Time You Want to Use Stealth:

  1. 🔌 Plug USB into Xbox 360
  2. 📂 Launch from Aurora: Usb0:\StealthClient\default.xex
  3. 🎮 Select "Connect to Xbox Live"
  4. ✅ Play online!

When Done Playing:

  • Exit dashboard (returns to Aurora/FSD)
  • Safely remove USB drive
  • Dashboard is gone - nothing left on HDD
  • Back to normal Aurora/FSD

📦 What's on Your USB

USB:\StealthClient\ ├── default.xex ← Runs from USB! ├── stealth.cfg ← USB-specific config ├── certificates.bin ← SSL certificates ├── assets\ ← Graphics/fonts │ ├── fonts\ │ ├── images\ │ └── sounds\ ├── logs\ ← Logs save here │ ├── stealth.log │ ├── errors.log │ └── connections.log └── USB_INSTRUCTIONS.txt ← This guide

Total Size: ~13 MB
Path: Usb0:\StealthClient\ (as seen by Xbox 360)

💡 Portable Mode: The stealth.cfg file has portable_mode=true and run_from_usb=true set automatically!

⚡ Advantages of USB Version

✓ Portable

Use the same USB on multiple Xbox 360 consoles. Take it to a friend's house!

✓ No HDD Changes

Nothing installed to HDD. Your main dashboard stays untouched.

✓ Easy Testing

Try before permanent install. No commitment required.

✓ Quick On/Off

Plug in when you need stealth. Remove when you don't.

⚠️ Important Notes

USB Must Stay Plugged In

While using the dashboard, the USB drive must remain connected. Removing it will crash the dashboard.

USB Speed Matters

Use a good quality USB 2.0 or 3.0 drive for best performance. Slow/cheap USB drives may cause lag.

Logs Save to USB

All logs are saved to Usb0:\StealthClient\logs\. Check these if you have issues!

SSL Certificates ARE Installed

On first launch, SSL certificates are installed to Xbox 360 system (one-time). This is needed for HTTPS interception. Dashboard itself runs from USB.

🔧 Troubleshooting

"File not found" error?

  • Make sure USB is formatted as FAT32
  • Check files are in USB:\StealthClient\
  • Verify default.xex exists
  • Try replugging USB drive

Dashboard crashes or lags?

  • USB drive might be too slow
  • Try a different USB drive (USB 2.0+)
  • Check USB is not corrupted
  • Consider HDD installation for better performance

Can't connect to Xbox Live?

  • Check internet connection is working
  • Verify server is online (check status page)
  • Wait for auto-configuration to complete
  • Check logs\ folder on USB for errors

Xbox won't detect USB?

  • Make sure USB is FAT32 (not NTFS or exFAT)
  • Try different USB port on Xbox 360
  • Reboot Xbox 360 with USB plugged in
  • Try a different USB drive

⬆️ Want to Upgrade to HDD?

Like the USB version? Install it permanently!

If you're happy with how it works, consider installing the HDD version:

Benefits:

  • ⚡ Much faster performance
  • ✅ Auto-boots on startup
  • 💾 No USB needed
  • 📊 Same features

How:

  1. Download HDD_Files.zip
  2. Follow HDD installation guide
  3. Takes ~10 minutes
View HDD Installation Guide

🎮 What's Next?

Setup complete! Here's what you can do:

🎮

Start Playing

Connect and enjoy online gaming!

🔌

Use on Other Consoles

Same USB works on all your Xbox 360s!

💬

Join Community

Share your experience!

Join Now →